如果不能正常显示,请查看原文 , 或返回

ORACLE-BASE

8i | 9i | 10g | 11g | 12c | 13c | Misc | PL/SQL | SQL | RAC | WebLogic | Linux

Home » Articles » 10g » Here

Active Session History (ASH)

Related articles.

Introduction

For a long time DBAs have been encouraged to use variations on the YAPP method of performance tuning, which focuses on wait event monitoring, rather than hit ratios. Tools like Statspack, AWR, ADDM and SQL Trace are all very useful for gathering wait event information during tuning, but they tend to focus on looking back at what has happened, rather than what is currently happening. The [G]V$ dynamic performance views provide masses of real-time information, but it can be difficult for beginners and experienced people alike to make good use of this information.

Oracle 10g introduced the Active Session History (ASH) as part of the Diagnostics and Tuning Pack. It samples information from the [G]V$ views allowing you to see current and historical information about active sessions on the database.

Being part of the Diagnostics and Tuning Pack means ASH is only available as a paid option on top of Oracle Database Enterprise Edition.

V$ACTIVE_SESSION_HISTORY

Samples of wait event information are taken once per second and made available using the V$ACTIVE_SESSION_HISTORY view. An active session is one that is waiting on CPU or any event that does not belong to the "Idle" wait class at the time of the sample. The sample information is written to a circular buffer in the SGA, so the greater the database activity, the less time the information will remain available for.

The V$ACTIVE_SESSION_HISTORY view is essentially a fact table, which can be linked to a number of dimensions to provide statistics specific to a variety of things including SQL statements, execution plans, objects, wait events, sessions, modules, actions, client identifiers, services and consumer groups etc. This makes it an incredibly flexible way of identifying what active sessions are doing, or have done. For example, if I wanted to see the main activity on the database for the last 5 minutes, I could use the following query.

SELECT NVL(a.event, 'ON CPU') AS event,
       COUNT(*) AS total_wait_time
FROM   v$active_session_history a
WHERE  a.sample_time > SYSDATE - 5/(24*60) -- 5 mins
GROUP BY a.event
ORDER BY total_wait_time DESC;

EVENT                                                            TOTAL_WAIT_TIME
---------------------------------------------------------------- ---------------
db file sequential read                                                      750
log file parallel write                                                       43
log file sync                                                                 42
db file parallel read                                                         32
control file sequential read                                                  22
ON CPU                                                                        21
db file parallel write                                                        21
log file switch (private strand flush incomplete)                              8
Disk file operations I/O                                                       1
control file parallel write                                                    1
buffer busy waits                                                              1

11 rows selected.

SQL>

Notice how the count of the samples is used to determine the time waited, not the WAIT_TIME or TIME_WAITED columns. Why is this done? Remember, this is sample data, so wait times are accumulating with each sample. Merely summing them will give a falsely high value. To explain this, imagine simplified case where a single session is waiting on "db file sequential read" for 5 seconds. That means we would have 5 samples, that may look like this.

EVENT                   SAMPLE_ID TIME_SEC
======================= ========= ========
db file sequential read         1        1
db file sequential read         2        2
db file sequential read         3        3
db file sequential read         4        4
db file sequential read         5        5

We know the total wait time is 5 seconds. If we count the number of samples, we get 5, which we equate to 5 seconds. If we sum the time for all 5 samples get 15 seconds.

The time columns in the ASH data are a little more complicated than they first appear, so check the documentation when using them. Incorrect usage of these columns is probably the most common mistake people make when using ASH views.

The fact ASH uses samples can of course mean certain bits of information slip through the net, but this is not really a problem. The chances are your main concerns will be those sessions or statements that are taking lots of time. The longer things take to run, the more samples they are likely to be picked up in. It is unlikely that anything of major concern will completely fail to register in the ASH views, but that doesn't mean you can ignore its limitations.

DBA_HIST_ACTIVE_SESS_HISTORY

To allow for historical access to the ASH data, one in ten samples are persisted to disk and made available using the DBA_HIST_ACTIVE_SESS_HISTORY view. So this is a sample of a sample. Using this view is similar to using the V$ACTIVE_SESSION_HISTORY view, but remember the sample time is now 10 seconds, so use (count*10) to measure time, rather than just the count.

SELECT NVL(a.event, 'ON CPU') AS event,
       COUNT(*)*10 AS total_wait_time
FROM   dba_hist_active_sess_history a
WHERE  a.sample_time > SYSDATE - 1 
GROUP BY a.event
ORDER BY total_wait_time DESC;

EVENT                                                            TOTAL_WAIT_TIME
---------------------------------------------------------------- ---------------
db file sequential read                                                     3860
ON CPU                                                                      1500
control file sequential read                                                 990
direct path read temp                                                        580
direct path read                                                             560
log file parallel write                                                      280
db file parallel write                                                       270
Disk file operations I/O                                                     240
log file switch completion                                                   150
log file sync                                                                130
db file parallel read                                                        130
.
.
.

26 rows selected.

SQL>

Enterprise Manager Performance Pages

Accessing the ASH information directly can be very useful, but there are a number of more efficient ways to get to some of this information. The performance pages of Enterprise Manager (Grid Control and Cloud Control) are fantastic. They are based on the ASH information, giving you easy access to real-time and historical performance information.

The following picture is an example of the Enterprise Manager performance home page.

Performance Home

An example of the Top activity page is shown below.

Top Activity

ASH Report

ASH reports can be displayed using Enterprise Manager, or generated from SQL*Plus. To manually generate them using SQL*Plus, run the following script, while logged in as a privileged user.

$ORACLE_HOME/rdbms/admin/ashrpt.sql

The script prompts you for the following details:

  • Report Type: [ html | text ]
  • Instance number: [all | n ] - On single instance databases, this defaults to "1". On RAC databases you can report on a specific instance number or "all" instances.
  • Begin Time: The script describes the formats for this value. It can be an explicit date string or an offset of the current datetime. The default is -15 minutes.
  • Duration: The number of minutes to report on. The default duration is (SYSDATE - begin_time).
  • Report Name: A default name is provided. Change this if required.

The script produces either text or HTML output as requested. Examples of these are shown below.

Depending on the options selected, the ASH report scripts call one of several table functions from the DBMS_WORKLOAD_REPOSITORY package.

  • ASH_REPORT_TEXT
  • ASH_REPORT_HTML
  • ASH_GLOBAL_REPORT_TEXT
  • ASH_GLOBAL_REPORT_HTML

SQL Developer and ASH Reports

If you are using SQL Developer 4 onward, you can view ASH reports directly from SQL Developer. If it is not already showing, open the DBA pane "View > DBA", expand the connection of interest, then expand the "Performance" node. The ASH reports are available from the "ASH Reports Viewer" node.

SQL Developer - ASH Report

ASH Viewer

The ASH Viewer tool gives a graphical view of active session history data within the Oracle instance. Interestingly, it is supports Oracle 8i onward. In releases prior to Oracle 10g, or if you don't have a Diagnostic and Tuning Pack license, you can connect using the "Standard" connection and the tool will mimic the functionality of ASH. If you have the necessary licenses, you can make "Enterprise" connections, which use ASH to provide the data.

For more information see:

Hope this helps. Regards Tim...

Back to the Top.

 

返回